Home

Raw Power WVO Centrifuge Prototype

Friday, 07 November 2008

The prototype Raw Power WVO Centrifuge is all set up and I have to say it is SWEEEET!. And I normally don’t condone use of capitals!

To properly integrate the new unit, I build a very sturdy table and improved the wiring with a weather proof junction box with weather proof switches. I also added my prototype inline heater that I will be offering as a bolt on option. Everything worked like a dream, the fabricated enclosure was impossible to seal properly and I ended up blowing out the upper motor bearing due to contamination. The O-ring seals work the way they are supposed to and I have not seen a drop get past them. I installed a vent on the lid to let the enclosure breath and have seen vapors escaping when the unit is at operating temperature, this was installed at a whim but was exactly the reason that I put the three ports into the lid: future expansion and creativity.

So, anyway, this entry was more of a general update for all those that are interested and watching the progress. (competitors and customers alike) .

Things on the go: tooling for the bolt on heater and testing the “More Power” 5000rpm version. Finally, the countdown for the pre-production orders in ON!

- Leon

Trackback(0)

TrackBack URI for this entry

Comments (0) Add Comment

Subscribe to this comment's feed

Write comment

< Prev		Next >

[ Back ]

Latest WVO Blog Entry

Thoughts on Falling Fuel prices
I don’t purchase fuel very often any more but even I have noticed that the cost of a gallon has fallen significantly in recent weeks from the craziness of the summer. I have long since abandoned the idea that the general public looks at the world the same way that I do and I wonder the
impact of this on the biofuel industry. I know that people are generally lazy in nature and by and large financially motivated. Clearly this drop in fuel price is going to allow people that were once very motivated to seek alternative energy so ... by leongriffin
Readmore...
Cold Weather WVO
Here is an interesting tidbit of a WVO observation. Mid summer, I put a sample of oil that I ran through the centrifuge next to a sample of oil that I had not. Both samples where “clear” but you could see particles in the pre centrifuged sample and it had a darker look.
Both of these sample came from the same source restaurant. Average temperature was mid to high 80s. The interesting part is when I looked at the samples recently. Now November, the average temperature is high 50s or so and you can see t ... by leongriffin
Readmore...
Raw Power WVO Centrifuge Prototype
The prototype Raw Power WVO Centrifuge is all set up and I have to say it is SWEEEET!. And I normally don’t condone use of capitals! To properly integrate the new unit, I build a very sturdy table and improved the wiring with a weather proof junction box with weather proof
switches. I also added my prototype inline heater that I will be offering as a bolt on option. Everything worked like a dream, the fabricated enclosure was impossible to seal properly and I ended up blowing out the upper motor bearing due to ... by leongriffin
Readmore...