WVO Designs

WVO Blog

Designs, Experiences and Observations

Tag >> WMO

NEW WVO Centrifuge 210oz

Posted by: leongriffin in WVO, WMO, Oil Cleaning, Designs, Centrifuge on Feb 25, 2010

WVO Centrifuge WVO Centrifuge

I shut myself in my design cave for the past few weeks and now am ready to leak you what I have been working on:  The RPC 210 - Thats 210oz collection capacity in the bowl.  By spec its about 10x the size and performance of the standard RPC 22 (22oz) so you can expect un-heated WVO flowrates at 50-100gph. 


But wait there is more: also in the design is a self purge option that will evacuate the bowl of the collected materials.  Obviously, this is machine is not for everyone, but if you are looking for automated 24/7 operation or need to clean serious amounts of oil; this is the answer. 


Finally, the best part:  I am looking at a base price of $5000 for a machine that will compete with centrifuges costing  4 times as much. 
If you are interested in getting one of these brutes, I will be taking orders for pre-production during the month of March.  I will do a batch of up to 10 units at $4000 each.  Reserve your machine with a $2000 deposit and I will guarantee delivery of a working machine meeting your satisfaction.    

I will have more information on the store page HERE

Comment (2)

Raw Power WVO Centrifuge Prototype

Posted by: leongriffin in WVO, WMO, Oil Dewater, Oil Cleaning, Designs, Centrifuge on Nov 6, 2008


The prototype Raw Power WVO Centrifuge is all set up and I have to say it is SWEEEET!.  And I normally don’t condone use of capitals! 

To properly integrate the new unit, I build a very sturdy table and improved the wiring with a weather proof junction box with weather proof switches.  I also added my prototype inline heater that I will be offering as a bolt on option.  Everything worked like a dream, the fabricated enclosure was impossible to seal properly and I ended up blowing out the upper motor bearing due to contamination.  The O-ring seals work the way they are supposed to and I have not seen a drop get past them.  I installed a vent on the lid to let the enclosure breath and have seen vapors escaping when the unit is at operating temperature, this was installed at a whim but was exactly the reason that I put the three ports into the lid: future expansion and creativity. 

So, anyway, this entry was more of a general update for all those that are interested and watching the progress.  (competitors and customers alike) . 

Things on the go:  tooling for the bolt on heater and testing the “More Power” 5000rpm version.  Finally, the countdown for the pre-production orders in ON!  

 - Leon

Comment (1)

Raw Power Oil Centrifuge Update

Posted by: leongriffin in WVO, WMO, Designs, Centrifuge on Oct 7, 2008

Everyone wants to know how we are doing with the Raw Power Oil Centrifuge release. Check out my release information on the forum here:

Comment (1)