1000W@230V Immersion Heater

1000W@230V Immersion Heater


33ft PVC Vacuum Hose 3/4"

Raw Power Oil Transfer Pump - .75" Hose Kit

100% of 100

This size is smaller than recommended for pumping oil.


-Hose - 33ft of vacuum/suction hose

-Fittings - (8) quick-connect fittings and plugs along with hose clamps

In stock

We've found a nice suction hose and bundled it with some adapt quick-connect fittings.

Comes with:

(33) Feet PVC Suction Hose

(3)  Male Camlock E Couplings

(3) Female Camlock C Couplings

(1) Camlock Dust Plug

(1) Camlock Dust Cap

(8) Stanless Steel Band Clamps

 This 3/4" size is NOT recommended with our oil transfer pumps.  The size is too small and will restrict flow.   May not work with heavy or cold oils.  

Camlock fittings for Pump and Two camlock fittings for two hoses.

- Typically flow is from Male fitting to Female Fitting

- Each hose has one of each and you can connect together so they don't leak in transport.

- You will typically have to heat the hose to get over the hose barbs.  Use heat gun.


Raw Power Monster Gear Pump from Leon Griffin on Vimeo.



More Information
Hose Size.75"
Write Your Own Review
You're reviewing:Raw Power Oil Transfer Pump - .75" Hose Kit
Your Rating