This is designed for the 22oz Raw Power Centrifuges increases the efficiency of the centrifuge for ultimate in cleaning performance while maintaining the easy and quick cleaning ability of the open bowl design. - Bolts on to current 22oz rotor designs with no modification - Bolts to all 22oz legacy bowls with minor modification (tapping of drain holes) - Does not need to be removed when cleaning bowl - Requires feed through center port.
The booster gets the oil spinning prior to entering the centrifuge bowl. This reduces the turbulence in the bowl. Also, the booster feeds the incoming/dirty oil into the bottom of the centrifuge bowl, forcing the dirty oil to have to work its way through the entire batch of existing oil in the bowl.
- Problems with the cleaning booster. Review by When installing this you use the holes that the dirty oil is supposed to drain out of. What do you do to fix this problem?
-Hello. We have a solution for that. New drain holes are to be drilled. All of our recent bowls have new drain hole starts on the back side. You just need to finish drilling them out. Also, we send a new reducer fitting which fits perfectly between the shaft and the lid. Please send me an email if you need one.
firstname.lastname@example.org (Posted on 7/30/2011)
- Excellent Quality as Usual Review by Kuan
- Nice addition to the Basic Centrifuge Review by Matthew
Write Your Own Review